---
title: "Color Signals"
slug: "equipment-hardware-homag-cube-color-signals"
updated: 2026-08-24T11:27:06Z
published: 2026-08-24T11:27:06Z
canonical: "docs.homag.cloud/equipment-hardware-homag-cube-color-signals"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.homag.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Color Signals

In the HOMAG , an LED strip has been integrated behind the HOMAG logo, which uses various color signals to indicate the current status of the HOMAG CUBE.

![Logo: weiß // Farbsignal: blau-statisch = Verbunden und betriebsbereit](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-13-connected_8c55957e46.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Color signal: blue-static = Connected and ready for use

Your HOMAG CUBE is ready for operation.

## HOMAG CUBE launches

![Logo: weiß // Farbsignal: weißer Kometenschweif = Startvorgang](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-1-boot_6d87678cbc.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Color signal: white comet's tail = launch process

The HOMAG CUBE starts. This process can take 1-2 minutes. Wait a moment. In the end, the CUBE should glow blue.

## Action necessary

![Logo: weiß // Farbsignal: blau-blinkend = Information vorhanden](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-12-user-action_8bbab2c594.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Color signal: flashing blue = information available

The CUBE works normally. However, there is information available (e.g. "Firmware update available", "New device was found",...). You will see what information is available when you enter the address [my.homag.cloud](https://my.homag.cloud) in your browser on your PC and select your CUBE under "Shop floor". Alternatively, you can also find the relevant information via [diagnostics via the Internet](/v1/docs/en/geraete-hardware-homag-cube-diagnose-ueber-das-internet) or [diagnostics in the local network](/v1/docs/en/geraete-hardware-homag-cube-diagnose-im-lokalen-netzwerk).

## General errors

![Logo: weiß // Farbsignal: gelb-blinkend = HOMAG CUBE Fehler](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-9-error_9890099bab.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Colour signal: flashing yellow = HOMAG CUBE error

Error in the HOMAG CUBE. The information available will be shown to you if you enter the address [my.homag.cloud](https://my.homag.cloud/) in your browser on your PC and select your CUBE under "Shop floor". Alternatively, you can also find the relevant information via diagnostics [via the Internet](/v1/docs/en/geraete-hardware-homag-cube-diagnose-ueber-das-internet) or [diagnostics in the](/v1/docs/en/geraete-hardware-homag-cube-diagnose-im-lokalen-netzwerk) local network.

## Onboarding at tapio not completed

![Logo: weiß // Farbsignal: weiß-blau blinkend = HOMAG CUBE Einrichtung](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-10-onboarding_7b4d41ae30.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Colour signal: flashing white-blue = HOMAG CUBE Setup

The HOMAG CUBE is connected to the Internet – but it still has to be registered at [my.tapio.one](https://my.tapio.one/login) . Add the HOMAG CUBE via your app (e.g. productionAssist, materialAssist...) AND restart the HOMAG CUBE. Then check whether the HOMAG CUBE is available in your tapio machine list. Then restart the HOMAG CUBE again.

## Problems with the Internet

![Logo: leuchtet nicht // Farbsignal: weißer Kometenschweif = Netzwerkfehler](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states_1600x900px_2_Netzwerkfehler_13a766c6fa.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: not lit // Color signal: white comet's tail = network error

There seems to be a network problem with the HOMAG CUBE. Please restart the HOMAG CUBE.

![Logo: orange // Farbsignal: weißer Kometenschweif = LAN-Kabel prüfen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states_1600x900px_3_LAN-Kabel_nicht_richtig_verbunden_7d8448962f.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: orange // Color signal: white comet's tail = check LAN cable

A connection from the HOMAG CUBE to the network via LAN cable is interrupted. Please check the LAN cable to your switch/router.

![Logo: gelb // Farbsignal: weißer Kometenschweif = kein Link](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states_1600x900px_4_kein_Link_9c28357a68.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: yellow // Color signal: white comet's tail = no link

A connection from the HOMAG CUBE to the network via LAN cable is interrupted. Please check the LAN cable to your switch/router.

![Logo: violett // Farbsignal: weißer Kometenschweif = keine IP-Adresse](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states_1600x900px_5_keine_IP_Adresse_eedc3bb801.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: violet // Color signal: white comet's tail = no IP address

Please check the IP settings of the HOMAG CUBE via the local diagnostics.

![Logo: weiß // Farbsignal: weiß-blinkend = Keine Verbindung zum Internet](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-6-no-connection_b4b4a0ec1c.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Color signal: flashing white = No connection to the Internet

The HOMAG CUBE cannot connect to the Internet. Please check whether the LAN connector is plugged [into the correct socket](/v1/docs/en/geraete-hardware-homag-cube-verbindung-netzwerk) and whether the [network requirements](/v1/docs/en/geraete-hardware-homag-cube-voraussetzungen-netzwerk) are met.

![Logo: blau // Farbsignal: weiß-blinkend = Netzwerk Fehler (NTP nicht verfügbar)](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states_1600x900px_8_NTP_nicht_verfuegbar_781b021b92.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: blue // Color signal: white-flashing = network error (NTP not available)

The HOMAG CUBE has no time synchronization. Please check the network status on the cloud diagnostics in the NTP management area.

## Service Conditions

![Logo: weiß // Farbsignal: gelb-blau = Aktive serviceRemote-Verbindung](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-7-isn_200141d742.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Colour signal: yellow-blue = Active serviceRemote connection

The HOMAG CUBE has established a serviceRemote connection to the HOMAG remote service server for service. You can activate and deactivate this connection yourself using the button on the CUBE. This connection is turned off by default and can only be activated by you.

![Logo: weiß // Farbsignal: hellblau-blau = SSH-Dienst aktiv](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/csm_icon-states-1600x900px-11-ssh_321acca5ff.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A47%3A14Z&se=2026-11-10T00%3A47%3A14Z&sr=c&sp=r&sig=VsFyb6VM9QLT%2FdALLlewve0wxb1Pl5TSWmISpCg3hJ0%3D)

Logo: white // Color signal: light blue-blue = SSH service active

The HOMAG CUBE has an SSH connection activated. This allows you to connect directly to the CUBE with a PC via command line. This connection is switched off by default and can be activated and deactivated by you via the button on the CUBE.