--- title: "Storage" slug: "materialmanager-in-a-nutshell-storage" updated: 2026-07-29T09:32:40Z published: 2026-07-29T09:32:40Z canonical: "docs.homag.cloud/materialmanager-in-a-nutshell-storage" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.homag.cloud/llms.txt > Use this file to discover all available pages before exploring further. # Storage ## Overview The list view gives you an overview of your material inventory. For plates, you have the option of displaying the **number (1),** **reservations (2)** and **the available plates (3).** You can also use this view to show whether the **minimum stock has been undercut (4** ). You can adjust the corresponding columns via the [table configuration](/v1/docs/en/allgemeines-kurz-erklaert-konfiguration-von-listen) . ![Listenansicht der Plattentypen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/inventory-01-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) List view of disk types ![Übersicht über das das vorhandene Plattenmaterial](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/materialManager-boards-inventory-01-overview-de_01.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Overview of the existing board material In the case of edge bands, the **number (1)** of all rolls, the **total length (2)** and information about whether the **minimum stock level has been undercut (3)** are displayed for each type. ![Listenansicht der Kantenbandtypen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-03-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) List view of edge band types ![Übersicht über die vorhandenen Kantenbandtypen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-04-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Overview of the existing edge tape types ## Stock and minimum stock In the detail view of a material type, you can find further information in the "Inventory" tab, such as the work and storage location or the creation date. You can also customize the columns in this view via the [table configuration](/v1/docs/en/allgemeines-kurz-erklaert-konfiguration-von-listen) . ![Übersicht über die vorhandenen Kantenbandtypen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/inventory-02-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Overview of the existing edge tape types ![Bestandübersicht in der Detailansicht eines Kantenbandtyps](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/materialManager-boards-inventory-02-detail-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Inventory overview in the detail view of an edgeband type Click on the "Edit" button to open the "Edit Panel Type" or "Edit Edge Tape Type" dialog box. In the "Materials Management" tab, you have the option of defining a minimum stock level for the material type. As soon as this is not reached, a warning appears in the line of the relevant material type. For plates, you will also find the options for [optimization](/v1/docs/en/intellidivide-tutorial-hinterlegung-von-plattendaten) with intelliDivide in this dialog. ![Materialwirtschaft eine Kantenbandtyps bearbeiten](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-07-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Materials Management Editing an Edge Belt Type ![Materialwirtschaft eines Plattentyps bearbeiten](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-08-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Processing Materials Management of a Panel Type To filter the material overview by materials with a minimum stock level, first add the corresponding column. To do this, open the **table settings (1),** click on **"+ Add column" (2)** and then select the **option "Below the minimum stock" (3).** ![Spalte "Mindestbestand unterschritten" in den Tabelleneinstellungen hinzufügen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-12-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Add the "Below Stock" column in the table settings In the "Filter" tab, add the column "Minimum stock below". Finally, confirm your changes to save them. !["Mindestbestand unterschritten" als Filter hinzufügen](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-13-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Add "Below minimum stock" as a filter Now the new filter appears in your overview and you can filter specifically for materials that have fallen below the minimum stock level. ![Materialübersicht gefiltert nach unterschrittenem Mindestbestand](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-14-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Material overview filtered by minimum stock level If, for example, you want to check for the next material order for which material type (here using the example of panels) has fallen below the minimum stock, you can display this information by applying the appropriate [filters](/v1/docs/en/allgemeines-kurz-erklaert-konfiguration-von-listen) on the overview page. In addition, you have the option of [exporting](/v1/docs/en/materialmanager-tutorial-exportieren-von-materialdaten) the material types separately whose minimum stock level has been undercut. ![Export aller Materialien deren Mindestbestand unterschritten wurde](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/storage-09-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Export of all materials whose minimum stock has been undercut ## Reservations In the detail view of a plate type, under the "Reservations" tab, you will find all reservations that have been created for it in productionAssist. If a production order is started with this panel type in productionAssist, the corresponding reservation is removed and the inventory is automatically reduced by the required materials in the materialManager. ![Vorhandene Reservierungen für einen Plattentyp](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/materialManager-boards-inventory-06-allocations-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Existing reservations for a plate type > [!NOTE] > **Note:** Reservations can be removed manually by deleting the corresponding order in productionAssist Cutting. ## Availability The "Available" column gives you an overview of the number of a material that is available in the warehouse and not reserved by existing production orders. This as-built information is used, among other things, by the [intelliDivide](/v1/docs/en/intellidivide-tutorial-erste-schritte) cutting optimization system. ![Übersicht über die Anzahl der verfügbaren Platten](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/materialManager-boards-inventory-07-overview-availability-de.png?sv=2026-02-06&spr=https&st=2026-11-09T23%3A46%3A50Z&se=2026-11-10T00%3A46%3A50Z&sr=c&sp=r&sig=D7yPtItTUR1iNXm8x3Lnvuw%2BbqDI3FngaIU%2F9RiW950%3D) Overview of the number of available plates --- ## References ### Links - [Use of data](/v1/docs/en/materialmanager-kurz-erklaert-verwendung-der-daten) - [Storage of disk data](/v1/docs/en/intellidivide-tutorial-hinterlegung-von-plattendaten#sperren-von-platten-und-resten-für-die-optimierung) - [Exporting Material Data](/v1/docs/en/materialmanager-tutorial-exportieren-von-materialdaten)