---
title: "Mounting"
slug: "sr-bridge-tutorial-mounting"
updated: 2026-07-29T09:32:40Z
published: 2026-07-29T09:32:40Z
canonical: "docs.homag.cloud/sr-bridge-tutorial-mounting"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.homag.cloud/llms.txt
> Use this file to discover all available pages before exploring further.

# Mounting

The device has the "protection class IP20" and should be installed as protected as possible.

## Necessary tools

You will need a power drill, a 6mm drill bit, and a Phillips screwdriver.

## Relevant Device Information

> [!WARNING]
> **Important note:** The sticker on the back of the device has the necessary information printed on it, which is required for commissioning. Make a note of these or take a photo of the label before installing the device.

**Explanation:**

- Art. No = HOMAG article number
- Serial = The unique serial number of the device
- Hostname = address where the device can be opened in the browser. This is made up of the homag-iot-MAC address of the device
- Password = device-specific password to access the device interface

![Wichtig: Diese Informationen werden für die Inbetriebnahme benötigt.](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/serviceRemote-Typenschild-Rueckseite_900x600px.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A24%3A44Z&se=2026-11-10T00%3A24%3A44Z&sr=c&sp=r&sig=7ulBjEn4gr25alh6y3aozvGxG2CO5eDTJaF%2FhHUjKzY%3D)

Important: This information is required for commissioning.

## Connecting accessories

- The power supply is plugged in at port X1.
- The network cable is plugged in at LAN1.
- The external button is plugged in at port X13.
- Please close the unused connections with the plugs provided.
- As soon as the power supply is connected to a socket, the computer starts.
- The network cable is connected to the hall network or to a free LAN port on a HOMAG Group Internet router.
- The external button can be positioned freely (cable length 25 m).

![Wo wird welches Kabel eingesteckt?](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/010-serviceRemote-Anschluss-Zubehoer.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A24%3A44Z&se=2026-11-10T00%3A24%3A44Z&sr=c&sp=r&sig=7ulBjEn4gr25alh6y3aozvGxG2CO5eDTJaF%2FhHUjKzY%3D)

Where is which cable plugged in?

[Embedded content](https://www.youtube-nocookie.com/embed/UjK7ZU9Fgf4?autohide=1&controls=1&rel=0&enablejsapi=1&origin=https%3A%2F%2Fdocs.homag.cloud)

How to connect the individual components correctly!

## Mounting the PC in the bracket

- The computer is locked into the DIN rail. The tab to be able to unhook it from the DIN rail must point downwards.
- The accessories can be plugged in before or after.

![Der Rechner muss in der Halterung einrasten.](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/005-serviceRemote-Halterung.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A24%3A44Z&se=2026-11-10T00%3A24%3A44Z&sr=c&sp=r&sig=7ulBjEn4gr25alh6y3aozvGxG2CO5eDTJaF%2FhHUjKzY%3D)

The computer must snap into the holder.

## Wall mounting

- Draw the holes.
- Drill the holes with the 6 mm drill bit and then insert the dowels.
- Screw in the screws with the Phillips recess – about 3 mm away from the wall.
- Hook the bracket into the screws.
- After installation, you can peel off the protective film of the HOMAG logo.

![Bohrlöcher anzeichnen.](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/001-serviceRemote-Bohrungen-anzeichnen.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A24%3A44Z&se=2026-11-10T00%3A24%3A44Z&sr=c&sp=r&sig=7ulBjEn4gr25alh6y3aozvGxG2CO5eDTJaF%2FhHUjKzY%3D)

Mark drill holes.

## Mounting on the machine

- Mark the holes.
- ATTENTION: Check beforehand that there are no components behind the sheet metal that could be damaged!
- Screw the screws directly into the sheet metal – these are self-tapping.
- Hook the bracket into the screws.
- After installation, you can peel off the protective film of the HOMAG logo.

## Mounting in the control cabinet/TSN junction box

- ATTENTION: Electrically trained personnel necessary!
- You can mount the computer inside the control cabinet on a DIN rail. The power supply is either through the supplied power supply or 24V DC from the machine.
- 15 mm of space should be kept free around the side of the computer.

![Auch möglich: Installation im Schaltschrank auf einer Hutschiene.](https://cdn.document360.io/43eaea7e-f51c-41df-9b73-bf55e0b1d20d/Images/Documentation/027-serviceRemote-Montage-Schaltschrank.jpg?sv=2026-02-06&spr=https&st=2026-11-09T23%3A24%3A44Z&se=2026-11-10T00%3A24%3A44Z&sr=c&sp=r&sig=7ulBjEn4gr25alh6y3aozvGxG2CO5eDTJaF%2FhHUjKzY%3D)

Also possible: Installation in the control cabinet on a DIN rail.

## Mounting without bracket

- The computer can also be stored without a holder. The ventilation slots on the back must not be covered.