Remove a material

In the Remove view, all materials are displayed with the key data. If necessary, the list can be customized via the column settings.

You can select the material in the list, take it directly from the storage or search by value.

Übersicht über eingelagerte Materialien

Overview of stored material

Select material from the list

All materials available for removal are displayed in the list. Filtering and sorting functions allow to find the right material quickly.

Start the removal process by clicking the Remove button.

In the dialog, all important information about the material, which has to be selected and to be removed, is displayed once again – as well as the storage location. 

If a LED strip is assigned to the storage, the compartment in which the material is located lights up in light blue.

You can confirm the removal of the material in different ways.

  • Click on confirmation (1)
  • Click on confirm with scan-symbol (2) and scan the materials or the storage location with the tablet
  • Scan the materials or the storage location with a connected bluetooth scanner

The scan of the removed material ensures that the correct material has been removed. In case of an error, a corresponding message will be displayed.

After the confirmation, the app closes the dialog automatically. 

Bestätigung der Entnahme des Materials

Confirmation of the removal of the material

Direct removal of the material from the storage

In case of a manageable stock or distinctive materials, a removal directly from the storage without prior selection in the app is often the faster way.

Bestätigung der Entnahme eines Materials durch einen Scan mit dem Tablet

Removal confirmation of the material by scanning with the tablet

Once material has been removed, this is recorded in the app by a scan with the tablet or a connected bluetooth scanner after clicking the remove (1) button . This ensures the accuracy of the storage.

Note: It is also possible to directly confirm a material removal by scanning it with the tablet or a connected bluetooth scanner . Afterwards, the following dialog opens with several options.

Bestätigung der Entnahme

Removal confirmation

  • Click on close (1) confirms the removal und will be displayed in the overview list
  • Click auf cancel removal (2) undoes the removal
  • By clicking scan next edgeband (3) or scanning another material with a connected bluetooth scanner or the tablet confirms the previous removal and removes the next edgeband

The scan of the removed material ensures that the correct material has been removed. In case of an error, a corresponding message will be displayed.

The dialog will be automatically closed after the confirmation. The dialog closes automaticallly after 60 seconds and the edgeband has been removed.

 

Search a material type in the list

In case of a larger material stock or the search for a specific material type, the filter functions in the list can be used.

Suche und Entnahme eines Materials

Search and removal of material

A connected bluethooth scanner can provide support for this.

If, e.g., a QR code containing the material code is available on the order papers or a label, it will be directly transferred to the filter (1) during a scan with a connected bluetooth scanner and a search will be performed.

Storage locations to which a LED strip has been assigned and in which the searched material is located light up blue.

Clicking on the remove (2) button starts the removal process. Alternatively, the material can be removed directly and the removal recorded by a scan.