Configuration

The productionAssist Nesting app is part of the Nesting Production Set.

Before the first use, the components of the set must be commissioned . As soon as the commissioning is complete, the configuration of the app can be started by clicking on "Configure".

After the initial configuration, the "Configure" button will turn into a gear. Here you can make further settings later.

Starten der Konfiguration — Starting the configuration

The app guides you through the configuration in individual steps.

Step 1: Customize the name of the workplace

In the first step, the name (1) of the workstation can be customized. Assigning a name that is as descriptive as possible makes it easier to select it later in the overview.

In addition, you have the option "Last workstation, status will be set to finished" (2). This automatically sets the status of the components that pass through this workstation to finished after completion.

Vergabe eines Namens für den Arbeitsplatz — Assignment of a name for the workplace

Step 2: Configure the scanner

The integration of a scanner is optional, but working with the application in combination with a scanner is much easier. More detailed instructions on how to add a scanner can be found here. If you do not want to include a scanner, click on "Continue without scanner" to proceed to the next step. By calling up the configuration again, you can also connect additional devices at a later time.

Einbindung eines Scanners — Integration of a scanner

CUBE">Step 3: Configure the HOMAG CUBE

Now connect the HOMAG CUBE to the app.

The HOMAG CUBE can be added by scanning the label on the back. The tablet (or the Bluetooth scanner connected in the previous step) can be used for this purpose.

Hinzufügen eines HOMAG CUBE — Adding a HOMAG CUBE

Scan the QR code on the back of the CUBE with your tablet. Please use the large QR code on the right of the label.

Das Hinzufügen des HOMAG CUBE nimmt etwas Zeit in Anspruch — Adding the HOMAG CUBE takes some time

Auswahl eines oder mehrerer HOMAG CUBEs am Arbeitsplatz — Selection of one or more HOMAG CUBEs at the workstation

After the HOMAG CUBE has been successfully added, the printer to be used at this workstation can be selected.

Step 4: Configuring the Printer

The integration of a printer is necessary for the output of labels. The devices connected to the HOMAG CUBE are displayed for selection in the following step.

It is also possible to select a printer that is connected to another HOMAG CUBE at another workstation. However, please take into account the size of the labels inserted in the device. It is a good idea, for example, to use the printer of the productionAssist Cutting for the materialAssist boards as well.

Before using the printer, it is necessary to select the label size (1) and calibrate it (2)

The printout can be verified by issuing a test label (3). The orientation can be adjusted if necessary by adjusting the spacing (4).

Auswahl eines Druckers — Choosing a Printer

Konfiguration des Druckers — Configuring the Printer

Auswahl der Etikettengröße — Label size selection

After setting up the printer, you can choose a label design. 2 different label designs are offered as standard.

Tip: You can upload your company lodge to my.tapio.one so that it appears on your labels.

Auswahl des Etikettendesigns — Label Design Selection

Step 5: Complete the configuration

Once all the steps have been completed, the configuration is complete and the workstation is ready to use.

Abschließen der Konfiguration — Completing the configuration