Blueprints for the holder of tablet and label printer
The components of our "Cutting Production Set" also include blueprints for a housing and bracket with which you can mount the HOMAG , printer and tablet on your saw. All related data can be downloaded from the download link on the right-hand side (download blueprints). If you want to integrate the components into an existing solution , then take a look at the installation dimensions.
Overview of components productionRack Cutting
The blueprints consist of:
Housing in which the HOMAG CUBE, the printer and the power supplies are installed
Optional: A self-made tablet holder that can be attached to the case with screws
Optional for sliding table saws: A bracket made of 18mm multiplex plywood that can be attached to the boom arm for the chip extraction hood. This is screwed to the boom arm with M10x200 mm screws or threaded rods. The housing (and tablet holder) can then be screwed onto it
Please note that the blueprints are designed for a plate material thickness of 16 mm for the housing, 19 mm for the front and 18 mm for the mount .
You can find more details about mounting the components on your saw here.
Unpack!
Build a shelf
Conditions for using the blueprints
The construction plans were drawn up to the best of our knowledge and taking into account technical concerns. Despite careful checking, errors may occur in connection with your machine and software settings, for which HOMAG cannot assume any liability. In addition, the safe assembly on the machine must be checked individually. With the download, the customer undertakes to check the construction plans for any errors and is responsible for the use of the construction plans and the CNC programs and the resulting products.