intelliDivide Cutting
.PNG?sv=2026-02-06&spr=https&st=2026-08-21T08%3A32%3A22Z&se=2026-08-21T08%3A43%3A22Z&sr=c&sp=r&sig=J7FO5qmDnjJV91L85j3kl92U%2FFDLirIFcUQcowWom0g%3D "Neue Spannungsfreischnitttypen: Schlitz mittig zwischen Streifen (1), Steg mittig zwischen Streifen (2)")
New stress clearance types: slit center between strips (1), bridge center between strips (2)
Selection of the "Simple Stress Clearance" type in the machine parameters
.PNG?sv=2026-02-06&spr=https&st=2026-08-21T08%3A32%3A22Z&se=2026-08-21T08%3A43%3A22Z&sr=c&sp=r&sig=J7FO5qmDnjJV91L85j3kl92U%2FFDLirIFcUQcowWom0g%3D "Auswahl des Typs \"Schlitz mittig zwischen Streifen\" in den Maschinenparametern. Als zusätzlicher Parameter kann der Abstand des Schlitzes von der Seite angegeben werden.")
Select the type "Slot center between strips" in the machine parameters. As an additional parameter, the distance of the slot from the side can be specified.
.PNG?sv=2026-02-06&spr=https&st=2026-08-21T08%3A32%3A22Z&se=2026-08-21T08%3A43%3A22Z&sr=c&sp=r&sig=J7FO5qmDnjJV91L85j3kl92U%2FFDLirIFcUQcowWom0g%3D "Auswahl des Typs \"Steg mittig zwischen Streifen\" in den Maschinenparametern. Als zusätzlicher Parameter kann die Länge des mittleren Stegs festgelegt werden.")
Select the type "Bridge centered between strips" in the machine parameters. As an additional parameter, the length of the middle web can be specified.
In addition to the "Simple Tension Clearance", intelliDivide now also offers the options "Slit Center Between Stripes" and "Bridge Center Between Stripes". The availability of these options depends on compatibility with the specific machine. In the machine parameters, these choices are only displayed if they are supported by the machine.
The new types make it easier to handle the board, as the saw first sets all the tension clearances and then starts splitting the strips. The panel can still be moved coherently and the handling of the individual strips that occur during continuous stress clearance is no longer necessary.
Contact person
HOMAG Group AG