.jpg?sv=2026-02-06&spr=https&st=2026-08-21T09%3A43%3A50Z&se=2026-08-21T09%3A54%3A50Z&sr=c&sp=r&sig=B24uPUlHmp14It1q5mxp1wSQlicQ%2BMdZ80gbQAImPiM%3D "Angabe des Materials für den Belag oben und Belag unten in der Stückliste.")
Specify the material for the pad at the top and pad at the bottom of the bill of materials.
.jpg?sv=2026-02-06&spr=https&st=2026-08-21T09%3A43%3A50Z&se=2026-08-21T09%3A54%3A50Z&sr=c&sp=r&sig=B24uPUlHmp14It1q5mxp1wSQlicQ%2BMdZ80gbQAImPiM%3D "Aktivierung der Laminatberechnung in den Optimierungsparametern.")
Activation of the laminate calculation in the optimization parameters.
.jpg?sv=2026-02-06&spr=https&st=2026-08-21T09%3A43%3A50Z&se=2026-08-21T09%3A54%3A50Z&sr=c&sp=r&sig=B24uPUlHmp14It1q5mxp1wSQlicQ%2BMdZ80gbQAImPiM%3D "Darstellung der zusätzlichen Laminat-Bauteile in der Zuschnittliste.")
Presentation of the additional laminate components in the cutting list.
.jpg?sv=2026-02-06&spr=https&st=2026-08-21T09%3A43%3A50Z&se=2026-08-21T09%3A54%3A50Z&sr=c&sp=r&sig=B24uPUlHmp14It1q5mxp1wSQlicQ%2BMdZ80gbQAImPiM%3D "Berechnung der Schnittpläne für das Plattenmaterial und für die Laminate.")
Calculation of the cutting plans for the board material and for the laminates.
Do you want to coat components yourself and your CAD/CAM system does not automatically output these additional covering components in the parts list?
From now on, you can have the calculation of the coatings carried out automatically in intelliDivide .
There are only two things to consider:
Enable the Top Pad and Bottom Pad columns in the parts list in intelliDivide. Now select the material code for the topping at the top and the topping at the bottom in these fields, analogous to the material code of the board material. Optionally, the field can also be used for the grain direction of the coverings, for example, to achieve a "shut-off" of the carrier material
In the optimization parameters, you will find a new "Coatings" tab. Here the "Add pads to the cutting list" must now be activated. In addition, you can specify the allowance for the pads and activate the allowance for the blank and specify the allowance here as well.
In intelliDivide , the cut list is displayed in addition to the parts list. In it you will find the coverings calculated for the carrier plate including their dimensions. Finally, the optimization can now be started.
Contact person
HOMAG Group AG