The information about the material types is stored in the materialManager at a central location. Many other applications and machines use this information and make use of this data. This significantly reduces the amount of maintenance required for your materials and you can be sure that the information is consistent and up-to-date everywhere.
intelliDivide
intelliDivide uses both type and as-built information for panels to create the optimal cutting plans . In particular, the availability of different plate sizes and leftovers with different costs play an important role.
Consideration of material costs in the cutting plan calculation
Overview of the material types used and generated residues per material type
Referencing the material for a part
Consideration of material and waste costs per material code
Referencing of the material per part
Overview of the material types used
Display of the décor in the cutting plan overview
productionAssist Cutting/Nesting
In productionAssist Cutting/Nesting , the décor, the plate code and the panel dimensions are displayed to match the cutting plan. This prevents mix-ups and miscuts.
Display of the décor for the respective cutting plan
Referencing the material in the cut list
productionManager
The productionManager uses the plate and edge data to simplify the selection of the material and to be able to easily check the specified material.
Support in the selection of the plate and edge material
Display of plate and edge material for each part
materialAssist
If you want to add a new edgeband roll, plate, or remnant in materialAssist, you can simply fall back on the material types that have already been created in materialManager. The material codes of these material types are in bold to distinguish them from those from the manufacturer's catalog that have not yet been created in the materialManager.
Adding a new material in materialAssist
Overview of materials from the materialManager