Purchase and add-ons

For a stand-alone HOMAG saw (i.e. without connection to a STORETEQ plane storage system or feeder), you have the option of purchasing the stock control option for manual offcuts together with your HOMAG saw. This gives you the basic functionality to manage your manual offcuts on the saw and to set them up using these instructions. Usually, no additional training is required. 

If you have connected your saw to a STORETEQ plane storage system or the STORETEQ F-100 feeder (with at least woodStore 8), you have the option of storage location management for panels and offcuts automatically. This option includes the functionality of the simple storage compartment management for manual offcuts, but also has additional (expert) functions, e.g. for managing cantilever racks and external storage management for complete panels.

The scanner package is not mandatory, but recommended if you want to use manual offcuts outside of the cutting process on your connected HOMAG saw often. With this scanner package you receive an industrial hand scanner and a signal light, which is connected to the offcut management accordingly. With the scanner, manual offcuts can be booked out quickly and easily by simply scanning them. The availability of an offcut is also signaled. This avoids chaos and misunderstandings that may arise due to poor discipline when booking offcuts out (see also Working with offcuts).

If you are working with the Cut Rite optimization software, the Cut Rite module “stock control” is required for a seamless link to the desired offcut management option.

Modernizations for offcut management

Existing machines with at least CADmatic 4.1 and at least Windows7 can usually be modernized for the management of offcuts. 

Here you can choose between the two levels of functionality described:

  1. Stock control for manual offcuts
  2. Storage location management for panels and offcuts (extended range of functions incl. additional training)

It is also possible to upgrade from the simple stock control for manual offcuts to the extended storage location management for panels and offcuts.

Note: If you connect to a STORETEQ storage system later and the associated complete woodStore storage management system, the storage system database and other parameters of the offcut management system you have been using up to that point will remain unchanged.