In the overview of the saw blades, the applied saw blade types are displayed. The data for this comes from twinio. The "Availability" column provides a quick overview of the available stock of tools.
Overview of all saw blade types that have been created in twinio
Clicking on a saw blade type takes you to the detail and inventory view of the selected saw blade type.
Details
Here you will find the information about the saw blade type, which is provided by tool manufacturers via twinio. The data is divided into technical data, "manufacturer data" and "additional data". Changes to this data, such as uploading a photo, etc., can be made in twinio.
Detailed view of a saw blade type
Technical data
Feature | Example | Description |
|---|---|---|
Tool position | Main saw | Position where the saw blade is installed in the machine (main saw or scoring saw) |
Diameter (mm) | 450,0 | Target diameter according to the manufacturer |
Cutting width (mm) | 4,80 | Target cutting width according to the manufacturer |
Number of teeth | 72 | Number of teeth on the saw blade according to the manufacturer |
Stem Sheet Thickness (mm) | 4,00 | Stem leaf thickness according to manufacturer |
Bore (mm) | 60,00 | Diameter of the bore according to the manufacturer |
Cutting material | HW | Material of the cutting edges according to the manufacturer (e.g. for carbide or DP for diamond) |
Maximum speed (1/min) | 4300 mm | Maximum speed according to the manufacturer |
Manufacturer data
Feature | Example | Description |
|---|---|---|
Manufacturer | Leuco | Name of tool manufacturer |
Article number | 80398937 | Article number of the tool type |
Additional data
Feature | Example | Description |
|---|---|---|
Manufacturer |
| Logo of the tool manufacturer (if they are a partner of tapio) |
Tools |
| Image of the tool |
Drawing |
| Schematic drawing of the tool, e.g. the tooth geometry |
Note: If no values are stored, the values are hidden in the display
Holdings
In the "Inventory" tab, you will find a summary of the saw blades of this saw blade type that you have created in twinio. You can create and edit them in twinio.
Stock of a saw blade type stored in twinio
You can find the following information in the columns of the inventory:
Feature | Example | Description |
|---|---|---|
# | 2 | Consecutive, automatically generated number to identify the saw blade |
Name | B500 Finishcut | Name for clear identification of the saw blade (e.g. by area of application) |
Actual diameter (mm) | 449,6 | Measured, real diameter of the saw blade. This changes over the life cycle of the tool, e.g. by resharpening the tool. |
Actual cutting width (mm) | 3,50 | Measured real cutting width of the saw blade. Changes over the life cycle of the tool, e.g. due to the resharpening of the tool. |
Availability | in use | Indicates the availability of the tool (possible statuses: Available, In Use, Not Available, Awaiting Confirmation) |
Tool life (m) |
| The number of sharpening cycles and the cutting meters per material category are calculated. The "Unknown" category appears if no material category has been assigned to the cut material, or if no material code or an unknown material code has been assigned to the cutting plan. |
Place | 0-240-06-0466 | Location where the saw blade is located (possible status: empty field when the tool is available, "during sharpening" or machine number and machine name) |
The table shows the last three sharpening cycles of the tool. To see all cycles of the tool, a popup can be opened by clicking in the cell.
Tool life per sharpening cycle (m) of a saw blade