Material-dependent optimization parameters for offcuts
intelliDivide Cutting, intelliDivide Nesting, materialManager
In the “Optimization” area of the materialManager, you have the option of creating material groups for optimization parameters for offcuts and specifying corresponding parameters.
Material groups can be formed on the basis of material properties.
For “Expensive materials”, the production of small offcuts may also be permitted.
The generation of offcuts can be completely deactivated for “Inexpensive material”.
For the settings defined in the materialManager to take effect, this function must be activated in intelliDivide for the respective machine.
The "Offcuts" column in the "Boards" tab shows the material group for each material (2). The column can be added using the table settings (1). If adjustments are required, it is possible to navigate directly to the group in the material manager (3).
From now on, parameters for offcuts that are used in intelliDivide can be defined in the materialManager in the Optimization area depending on the material. For this purpose, the materials are grouped together based on their properties.
This grouping makes it possible to define different minimum sizes for offcuts depending on the properties of a material. For example, for inexpensive materials, the creation of offcuts can be avoided as the cost is disproportionate to the value of the material. On the other hand, very small offcuts may be allowed for expensive materials, where the extra effort is worthwhile.
Efficiency is optimized by reducing costs and effort.
The feature is available depending on the license and is included in intelliDivide Cutting Advanced / Premium and intelliDivide Nesting Advanced.
Currently, material-dependent optimization parameters can be defined for offcuts. By the end of the year, this option will also be available for trims and tension trims.
Back to List
Stiles Machinery Inc. Sales
+1-616-698-7500 info@stilesmachinery.com www.stilesmachinery.comStiles Machinery Inc. Service
+1-616-698-6615 techsupp@stilesmachinery.com Contact form