Maximum book height
The maximum book height can be set in intelliDivide under the tab "Book height" in the machine parameter settings. The availability of this setting depends on the selected machine.
Setting the maximum book height
As an alternative, you can enable the option "Use of material-dependent parameters", which allows you to utilize the materialManager's settings for the maximum book height based on material-dependent parameters.
Activation of the material-dependent parameters
By creating material groups in materialManager, it is possible to define different maximum book heights depending on common properties.
For sensitive materials, for example, it is possible to specify that no stacks are formed so that each board is processed individually. For very heavy materials, the book height can be limited to make the operator's work easier, while the maximum allowed book height of the machine is utilized as a standard.
The capabilities of the machine are taken into account. For example, with a SAWTEQ B-320 flexTec or a circular table saw, each board is processed individually regardless of the settings.
Material groups for the book height
Basically, three different options can be set for the book height.
For standard material, the "Maximum book height of the machine" can be selected to fully utilize the machine's allowed book height.
The 'Single board' option ensures that boards which are sensitive or covered with a protective film are processed individually.
For heavy materials the book height can be limited to facilitate the operator's work.
Adjustment of the book height for each material group
In intelliDivide, you can view the material group for each material under the 'Boards' tab in the "Book height" column.
Display of the material group for the book height in intelliDivide