Material-dependent optimization parameters for machine parameters
intelliDivide Cutting, materialManager
In the “Optimization” area in the materialManager, you have the option of defining material groups for the machine parameters.
Material groups can be defined on the base of material properties.
The material parameter group defined on the machine in CADmatic can be specified for each material group.
The material group is displayed in intelliDivide for each material in the “Machine parameters” column on the “Boards” tab.
The material parameter group is referenced in the SAW file for each material and transferred to the machine.
The material parameter group can be used to control various functions in CADmatic on the machine.
From now on, parameters for the machine can be defined in the materialManager in the Optimization area, in the same way as for offcuts, depending on the material. For this purpose, the materials are combined into groups based on their properties.
This grouping makes it possible to assign each material to a material parameter group depending on its properties. This information is stored by intelliDivide in the SAW file and used by the machine.
Various functions on the machine can be controlled via the material parameter group. For example, it is possible to specify whether the scoring saw should be used for a material or how high the saw blade projection should be.
The availability of the function depends on the intelliDivide license. It is included in intelliDivide Cutting Advanced / Premium. The function must also be supported by the machine.
It is not necessary to activate the function in intelliDivide.
Back to List
Stiles Machinery Inc. Sales
+1-616-698-7500 info@stilesmachinery.com www.stilesmachinery.comStiles Machinery Inc. Service
+1-616-698-6615 techsupp@stilesmachinery.com Contact form