Material-dependent optimization parameters for trim cuts
intelliDivide Cutting, materialManager
In the “Optimization” section of the materialManager, you have the option of creating material groups for optimization parameters for Trim cuts and specifying corresponding parameters.
Material groups can be created based on material properties.
For hard materials such as HPL, the trim cuts can be reduced. This reduces waste and saves costs.
For materials that are often delivered damaged, the trim cuts can be increased to ensure the quality of the cut parts.
For the settings defined in the materialManager to take effect, this function must be activated in intelliDivide for the respective machine.
The material group is displayed for each material in the “Trim cut" column in the “Boards” tab.
From now on, parameters for trim cuts can be stored in materialManager in the Optimization area, analogous to the offcuts depending on the material, which are used in intelliDivide. For this purpose, the materials are grouped according to their properties.
This grouping makes it possible to define different trim cuts depending on the properties of a material.
For example, the trim cuts can be reduced for very hard materials. This reduces waste and saves costs. In the case of frequently damaged material, on the other hand, the trim cuts can be increased to ensure the quality of the cut parts.
This function depends on the license type and it is included in intelliDivide Cutting Advanced / Premium.
Back to List
Stiles Machinery Inc. Sales
+1-616-698-7500 info@stilesmachinery.com www.stilesmachinery.comStiles Machinery Inc. Service
+1-616-698-6615 techsupp@stilesmachinery.com Contact form